Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

🐧  Instructions for Linux

  1. Login to the client you are planning to upgrade.

  2. Uninstall any previous version of the NetWorker software prior to installing the new version.

  3. Fetch the installer from the VSS Users Storage. Replace $USER with your VSS Username.

    # Ubuntu/debian based
scp $USER@vskey-stor.eis.utoronto.ca:ut-vss-lib/networker/pub/networker/LINUX/nw191002_linux_x86_64/lgtoclnt_19.10.0.2_amd64.deb /root/

# Red Hat based
scp $USER@vskey-stor.eis.utoronto.ca:ut-vss-lib/networker/pub/networker/LINUX/nw191002_linux_x86_64/lgtoclnt-19.10.0.2-1.x86_64.rpm /root/

  4. Proceed to install the package: 

    # Ubuntu/debian based
sudo dpkg -i /root/lgtoclnt_19.10.0.2_amd64.deb

# Red Hat based
yum localinstall --nogpgcheck  /root/lgtoclnt-19.10.0.2-1.x86_64.rpm
dnf install

  5. Check if lgto package has been installed successfully: 

    # Ubuntu/debian based
pkg -l | grep lgto

# Red Hat based
rpm -qa | grep lgto

You should get a smilier output: 

  # debian based
  ii  lgtoclnt                          19.10.0.2                               amd64        NetWorker Client

  # Red Hat Based
  lgtoclnt-19.10.0.2-1.x86_64

  1. After the install, make sure the NetWorker client is running: 

    systemctl status networker

  2. Submit an echo request by following this link How-to check NetWorker client connectivity for UTORrecover.

  3. The echo request result should be marked as Processed to be successful.

🪟 Instructions for Windows

  1. Login to the host as Administrator you are planning to upgrade.

  2. Uninstall any previous version of the NetWorker software prior to installing the new version. How-to uninstall the Windows NetWorker software for UTORrecover

  3. Fetch the installer from the VSS Users Storage with WinSCP or an equivalent SCP/SFTP client using the following settings:

    1. host: vskey-stor.eis.utoronto.ca

    2. VSS username and password.

  4. Navigate to /ut-vss-lib/networker/pub/networker/WINDOWS as shown below. Then download the right installer for your OS.

    CleanShot 2024-10-21 at 15.07.03-20241021-190800.png

  5. Follow the installation instructions.

  6. Submit an echo request by following this link How-to check NetWorker client connectivity for UTORrecover.

  7. The echo request result should be marked as Processed to be successful.

  • No labels

University of Toronto - Since 1827